Kidde 30CUA10-VCA: lights, beeps & chirps explained

Hardwired smoke + CO combo, 10-year sealed backup, voice alerts. Here is what every light and sound on the Kidde 30CUA10-VCA means, how to test and hush it, and when it needs replacing. I install this model across Vancouver and the Lower Mainland. For carbon monoxide protection, see our carbon monoxide alarm installation.

What the lights mean

LightMeaning
Green, steadyRunning on household power. Normal.
Green, blinks about every 60 sRunning on the backup battery (power is off or the breaker tripped).
Red, flashing with the alarmThis alarm sensed smoke or CO. On interconnected alarms, only the one that started it flashes red.
Red, blinks every 2 sHush mode. It will reset by itself in a few minutes.
Red, blinks every 15 sSmoke alarm memory: it sounded in the last 24 hours. Press the button to clear.
Amber, blinks + chirp every 60 sLow battery. Sealed battery: the alarm needs replacing.
Amber, blinks + chirp every 60 s, soon after installFalse low battery: power was connected before the backup battery was activated. Call the installer to reset it.
Amber, 2 blinks + 2 chirps every 60 sEnd of life (10 years). Replace the alarm.
Amber, blinks + 3 chirps every 60 sSmoke sensor fault. Press the button once to try a reset; if it continues, replace the alarm.
Amber, 3 blinks + 3 chirps every 60 sFatal fault. Press the button once to try a reset; if it continues, replace it.
Amber, 4 blinks + 3 chirps every 60 sThe test/hush button is stuck. Press it to free it; if it stays stuck, replace the alarm.
No light, constant toneInternal failure (MCU). Replace the alarm.
2 red blinks every 15 sCO alarm memory: CO was detected recently. Press the button to clear.
Amber, 2 blinks + 3 chirps every 60 sCO sensor fault. Press the button once to try a reset; if it continues, replace the alarm.

What the beeps and chirps mean

SoundMeaning
3 long beeps, pause, repeatSMOKE. Get everyone out and call 911.
4 quick beeps, pause, repeatCARBON MONOXIDE. Get everyone into fresh air and call 911.
1 chirp every 60 sLow battery (sealed: replace the alarm). Press once to silence for 24 h.
2 chirps every 60 sEnd of life. Replace the alarm. Press to silence for 24 h.
3 chirps every 60 sSmoke or CO sensor fault. Replace the alarm.

Want to hear them? The free app's sound library plays each pattern.

How to

Test it

Press and release the test/hush button. The alarm sounds its pattern, then stops. Kidde recommends testing weekly.

Hush a nuisance alarm

Press the button on the alarm that is flashing red. It goes quiet for several minutes, then resets. Very heavy smoke overrides hush. Never hush a real alarm.

Clear the memory light

Press the button once. Memory clears by itself after 24 hours.

End of life

Two chirps every minute with two amber blinks means the 10 years are up. You can silence it for 24 hours, but after 7 days it can't be silenced. The sealed battery can't be switched off for storage; it must be permanently discharged before disposal (Kidde's procedure is on its support site, or Richard does it when he replaces it).

After a power outage

The alarm runs on its sealed backup battery and the green light blinks instead of staying on. When power returns, the green light goes steady again. A low-battery chirp after a long outage means the backup is used up: replace the alarm.

Interconnects with up to 24 Kidde devices. Connect power after the alarm is rotated onto its bracket, or it may give a false low-battery chirp.

How long does it last?

Replace it 10 years after the date printed on the back. The test button can still work after the sensor has worn out, so the date is what counts. Sometimes the date is on the side, but the back is the best place to look. Need one swapped? See smoke alarm replacement and repair.

Price

$109.99 installed, plus the flat $99.99 service fee. GST only. See all prices.

Source: manufacturer's manual. Always follow the instructions that came with your alarm.

Other alarm guides

Kidde 30CUD10-CA · Kidde 20SA10-CA · Kidde 20SD10-CA · Kidde 900-0235 · Kidde i12010S · Kidde i12010SCO · Kidde i12040ACA · Kidde 900-0220CA · Kidde P4010ACS

All alarm guides · Chirp codes: Kidde vs First Alert · Kidde smoke alarms in Vancouver

Questions

Why is my Kidde 30CUA10-VCA chirping?
1 chirp every 60 s: Low battery (sealed: replace the alarm). Press once to silence for 24 h. 2 chirps every 60 s: End of life. Replace the alarm. Press to silence for 24 h. 3 chirps every 60 s: Smoke or CO sensor fault. Replace the alarm.
What does the green, steady light mean on the Kidde 30CUA10-VCA?
Running on household power. Normal.
How long does the Kidde 30CUA10-VCA last?
Replace it 10 years after the date of manufacture printed on the back.

Still Beeping? I'll Sort It

Flat $99.99 service fee plus the alarm, from $64.99 installed. Evenings and weekends at no extra charge. Book online or call or text 604-401-3347.

Flat-fee pricing · No call-out charge · Evenings & weekends included
Call Richard Email Us